Dishwasher instructions (Fagor Pass-Through Dishwasher)

Set up

1.     Insert the plug, filter tray, filter basket and metal dish rack guide

2.    Close the hood

3.   Hold the power button for 3 seconds

4.    The machine will fill with water and heat to 55°C (this takes approx. 5-10 mins)

5.   It is ready to use when the green light above P2 is solid

 

Running a cycle (aka actually washing dishes)

1.     Load the plastic dish rack

2.    Pull the hood down (P2 is the default wash cycle and will run automatically – cycle takes approx. 1 min).
P2 light flashing: wash in progress
P2 light solid: wash complete

Note: The P3 wash cycle can be used for very heavily soiled loads

 

Shut down

1.     Remove the metal dish rack guide, filter tray, filter basket and plug

2.    With the hood open, hold the P1 button for 3 seconds

3.   The machine will drain automatically and turn itself off

4.   Clean filter tray and filter basket in the sink

Comment